Headrest Guide, Removing And Installing, Standard/Sport Seat: Removing
- Follow all safety precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS .
- Before handling pyrotechnic components (for example, disconnecting the connector), the person handling it must "discharge static electricity". For example, this can be done by briefly touching the door striker.
-- Remove The Front Seat:
- Standard seat and sport seat (manual). Refer to FRONT SEAT, REMOVING AND INSTALLING, MANUAL .
- Standard Seat, Power Sport Seat and Comfort Seat. Refer to POWER FRONT SEAT, REMOVING AND INSTALLING .
-- Attach the front seat to the :VAS6136 . Refer to FRONT SEAT, MOUNTING ON FIXTURE FOR SEAT REPAIR .
-- Remove the backrest cover. Refer to BACKREST COVER, REMOVING AND INSTALLING, TWO PIECE .
-- Remove the headrest. Refer to HEADREST, REMOVING AND INSTALLING, HEADREST WITH SLIDING LOCKING MECHANISM .
-- Remove the cover with the front backrest padding. Refer to BACKREST COVER AND CUSHION, REMOVING AND INSTALLING, STANDARD/SPORT SEAT .
Headrest Guide without Release Button:
-- Press the locking tabs -arrows- on the headrest guide -1- toward the center of the headrest guide.
-- Hold the locking tabs down.
-- Pull the headrest guide upward out of the backrest frame -2-.
Headrest Guide With Release Button:
-- Press the locking tabs -arrows- on the headrest guide -1- toward the center of the headrest guide.
-- Hold the locking tabs down.
-- Pull the headrest guide upward out of the backrest frame -2-.