LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1424 (Seat Frames (Cabriolet)) >> 72 Seat Frames >> Front Seats >> Front Seat, Removing And Installing >> Front Seat, Removing And Installing, Bucket Seat >> Notes

Front Seat, Removing And Installing, Bucket Seat: Notes

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • The bucket seat does not have a thorax airbag. Therefore, the electrical connection for the thorax airbag in the vehicle wiring harness must have a termination resistor.
  • The termination resistor is a component of the wiring harness.
scientia non olet · About LEMON Manuals