LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1424 (Seat Frames (Cabriolet)) >> 72 Seat Frames >> Front Seats >> Driver And Front Passenger Seat Lumbar Support Adjustment Switch -E176- / -E177-, Removing And Installing >> Driver/Front Passenger Seat Lumbar Support Adjustment Switch -E176- / -E177-, Removing And Installing, Bucket Seat >> Removing

Driver/Front Passenger Seat Lumbar Support Adjustment Switch -E176- / -E177-, Removing And Installing, Bucket Seat: Removing

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing Lumbar Support Adjustment Switch Bolts
GWWA72-10111Courtesy of AUDI OF AMERICA, LLC

-- Remove the bucket seat. Refer to FRONT SEAT, REMOVING AND INSTALLING, BUCKET SEAT .

-- Secure the front bucket seat to the :VAS6136  . Refer to FRONT SEAT, MOUNTING ON FIXTURE FOR SEAT REPAIR .

-- Remove the sill-side trim. Refer to SILL-SIDE TRIM, REMOVING AND INSTALLING, BUCKET SEAT .

-- Remove the bolts -arrows-.

-- Remove the lumbar support adjustment switch -1-.

scientia non olet · About LEMON Manuals