Crimping Pliers -.35-2.5MM:Vas1978/1A

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

The : VAS1978/1A or the :VAS1978/1-2 together with the :VAS1978/1-1 , the :VAS1978/1-3 , or the :VAS1978/2A are used to press the crimp connector from the wiring harness-repair kit.

Courtesy of AUDI OF AMERICA, LLC

Crimp connectors, press using the :VAS1978/1A .

The following crimping heads are available for the :VAS1978/1-2 :

Wiring Harness Repair - Interchangeable Head:VAS1978/1-3
Wiring Harness Repair - Crimping Head -.35-2.5mm:VAS1978/1-1
Wiring Harness Repair Set - Crimping Head - 4-6mm:VAS1978/2A
Wiring Harness Repair Set - Crimping Head - JPT:VAS1978/9-1

In conjunction with :VAS1978/9-1 , crimping pliers are used to crimp terminals onto individual wires when repairing wiring cross-sections up to 0.35 mm² .

Changing the Crimping Head:

-- Open crimp pliers completely.

-- Disengage both locking pins -arrows- from crimp pliers basic tool.

Courtesy of AUDI OF AMERICA, LLC

-- Insert the required crimping head from above -arrow- in crimp pliers basic tool.

Courtesy of AUDI OF AMERICA, LLC

-- Lock the crimping head by pressing in the pins -arrows- into crimp pliers basic tool.

Courtesy of AUDI OF AMERICA, LLC