LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1375 (Body Front (Cabriolet)) >> 50 Body Front >> Fender >> Fender Seal, Removing And Installing

Fender Seal, Removing And Installing

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Fender Seal Components
GWWA50-10232Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
  1. Seal
    • Self-adhesive.
    • Remove the protective film and slide the seal onto the fender mounting flange under the wheel housing liner as illustrated.
  2. Fender Flange
    • Slide the seal onto the fender flange between the wheel housing liner and the inside of the fender.
  3. Fender
  4. Wheel Housing Liner
scientia non olet · About LEMON Manuals