Trim Molding, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Trim Molding

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Unclip the decorative trim -1- starting at the front using the :3409 -arrow A-.

NOTE:

If necessary, use a flat blade screwdriver to gently lift the decorative trim.

-- Remove the decorative trim from the side trim panel toward the rear in the direction of -arrow B-, while lifting the rear area of the decorative trim again slightly using the :3409 , so that the hook -2- inside the decorative trim can be loosened from the opening in the side trim panel.