Carpet, Removing And Installing: Removing
-- Remove the front seat:
- Standard seat and manual Sport seat. Refer to FRONT SEAT, REMOVING AND INSTALLING, MANUAL .
- Standard Seat and Power Sport Seat, Comfort Seat and Super Sport Seat. Refer to POWER FRONT SEAT, REMOVING AND INSTALLING .
- Bucket seat. Refer to FRONT SEAT, REMOVING AND INSTALLING, BUCKET SEAT .
-- Remove the bench seat. Refer to BENCH SEAT/SINGLE SEAT, REMOVING AND INSTALLING .
-- Remove the center console. Refer to CENTER CONSOLE, REMOVING AND INSTALLING .
-- Remove The Air Guides On The Center Tunnel. Refer to OVERVIEW - AIR ROUTING AND AIR DISTRIBUTION IN PASSENGER COMPARTMENT .
-- Remove the center console bracket and lower the shift mechanism. Refer to CENTER CONSOLE BRACKET, REMOVING AND INSTALLING .
-- Remove the A-pillar lower trim panels. Refer to A-PILLAR TRIM PANEL, REMOVING AND INSTALLING, A-PILLAR LOWER TRIM PANEL .
-- Remove the sill panels. Refer to SILL PANEL, REMOVING AND INSTALLING .
-- Remove the left and right front belt end fitting. Refer to FRONT BELT END FITTING, REMOVING AND INSTALLING .
-- Disengage the carpet at brackets -1 and 2-.
-- Pull the carpet -3- toward the rear.
Make sure to not rip the carpet at the cut-outs.
-- Fold up and remove the carpet.