Brake Pedal, Removing And Installing, Vehicles With Manual Transmission

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools And Workshop Equipment Required

Torque Wrench 1410:VAG1410

To remove the brake pedal on vehicles with a manual transmission, the mounting bracket must be removed.

-- Remove the mounting bracket. Refer to MOUNTING BRACKET, REMOVING AND INSTALLING, VEHICLES WITH MANUAL TRANSMISSION .

Remove the brake pedal on the removed mounting bracket.

-- Remove the bolt -3-.

Fig 1: Exploded View Of Brake Pedal, With Components (Vehicles With Manual Transmission)

Courtesy of AUDI OF AMERICA, LLC

-- Remove the retainer -1- on the left side and remove the pins -5- to the right.

Fig 2: Exploded View Of Brake Pedal, With Components

Courtesy of AUDI OF AMERICA, LLC

-- Remove brake pedal.

Install the brake pedal on the removed mounting bracket.

WARNING:

If possible, leave the brake pedal stop installed; it could break the mount for the brake lamp sensor if the brake pedal is released too quickly.

Fig 3: Exploded View Of Brake Pedal Assembly

Courtesy of AUDI OF AMERICA, LLC

NOTE:

If possible, leave the brake pedal stop -17- installed; it could break the mount for the brake lamp sensor -10- if the brake pedal is released too quickly.

Do not destroy the brake pedal stop -17-. There is the danger that the brake lamp sensor mount -10- could break when the brake pedal is released.

-- Slide the right retainer onto the pins.

-- Slide the pins from right to left through the axle in the brake pedal.

-- Secure the pins with the left retainer -1-.

Fig 4: Exploded View Of Brake Pedal, With Components

Courtesy of AUDI OF AMERICA, LLC

The pins must be secured with the retainers on both sides.

Fig 5: Exploded View Of Brake Pedal, With Components

Courtesy of AUDI OF AMERICA, LLC

-- Install and tighten the bolt -3-.

-- Install the mounting bracket. Refer to MOUNTING BRACKET, REMOVING AND INSTALLING, VEHICLES WITH MANUAL TRANSMISSION .