Brake Master Cylinder, Removing And Installing: Installing: Notes
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Brake Charger/Bleeder Unit:VAS5234
-- Install In Reverse Order Of Removal.
Note The Following Points When Installing:
-- When installing together the brake master cylinder and brake booster, make sure that the push rod is correctly located in the brake master cylinder.
O-ring between master brake cylinder and brake booster is present.
-- Bleed the brake system. Refer to BRAKE SYSTEM, BLEEDING .