Brake Booster, Removing And Installing: Installing
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Brake Charger/Bleeder Unit:VAS5234
-- Install In Reverse Order Of Removal.
Note The Following Points When Installing:
Clip the Brake Pedal to the Brake Booster.
-- Hold the push rod ball head in front of the mount and push the brake pedal toward the brake booster until the ball head engages audibly.
-- Bleed the brake system. Refer to BRAKE SYSTEM, BLEEDING .
| Tightening Specifications | |
|---|---|
Brake Booster To Pedal Assembly/Bulkhead
|
23 Nm |
Brake Master Cylinder To Brake Booster
|
23 Nm |
| Brake Lines To Brake Master Cylinder | 18 Nm |