Overview - Impact Member, Vehicles Through My 2011 Except AUDI RS5
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
- Impact Member
- Removing and installing. Refer to IMPACT MEMBER, REMOVING AND INSTALLING, VEHICLES THROUGH MY 2011 .
- Low Tone Horn -H7-
- Removing and Installing. Refer to Horn .
- Right Spacer
- For the bumper cover
- Right Impact Bar Mount
- Removing and installing. Refer to Installing => Right Mount .
- High Tone Horn -H2-
- Removing and Installing. Refer to Horn .
- Bolt
- 30 Nm
- Left Spacer
- For the bumper cover
- Bolt
- 4 Nm
- Secures the lock carrier
- Bolt
- 30 Nm
- Left Impact Member Mount
- Removing and installing. Refer to IMPACT MEMBER MOUNT, REMOVING AND INSTALLING FOR VEHICLES THROUGH MY 2011 => Left Mount .
- Bolt
- 20 Nm
- Nut
- Tightening specification. Refer to Horn .