LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1162 (RCM Guided Routine Testing -- (4 Of 4)) >> Pinpoint Tests >> Pinpoint Test ZA: Passenger Door and Left C-Pillar Side Impact Sensor (including Invalid Serial Data Received) >> Normal Operation and Fault Conditions

Normal Operation and Fault Conditions

WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.

The RCM monitors the passenger door and the second row left side impact sensors and circuits for the following faults: 

PPT Z RCM DTC FAULT TRIGGER CONDITIONS

DTC Description Fault Trigger Conditions
B1415:11 Driver Side Restraints Sensor 2: Circuit Short to Ground Sets when the RCM senses a short to ground from the driver C-pillar side impact sensor feed circuit, a short to ground from the passenger door side impact sensor feed circuit, a short to voltage from the driver C-pillar side impact sensor feed circuit that is less than the normal sensor operating voltage, or a short to voltage from the passenger door side impact sensor feed circuit that is less than the normal sensor operating voltage.
B1415:12 Driver Side Restraints Sensor 2: Circuit Short to Battery Sets when the RCM senses a short to voltage from the driver C-pillar side impact sensor feed or return circuit or from the passenger door side impact sensor feed or return circuit that is greater than the normal sensor operating voltage.
B1415:13 Driver Side Restraints Sensor 2: Circuit Open Sets when the RCM senses an open from the driver C-pillar side impact sensor feed or return circuit, or a short to voltage from the sensor feed or return circuit that is within a predetermined range from the normal sensor operating voltage.
B1415:96 Driver Side Restraints Sensor 2: Component Internal Failure Sets when the RCM senses a short to ground from the driver C-pillar side impact sensor feed circuit, a short to ground from the passenger door side impact sensor feed circuit, a short to voltage from the driver C-pillar side impact sensor feed circuit that is less than the normal sensor operating voltage, or a short to voltage from the passenger door side impact sensor feed circuit that is less than the normal sensor operating voltage.
B1418:11 Passenger Side Restraints Sensor 1: Circuit Short to Ground Sets when the RCM senses a short to ground from the driver C-pillar side impact sensor feed circuit, a short to ground from the passenger door side impact sensor feed circuit, a short to voltage from the driver C-pillar side impact sensor feed circuit that is less than the normal sensor operating voltage, or a short to voltage from the passenger door side impact sensor feed circuit that is less than the normal sensor operating voltage.
B1418:12 Passenger Side Restraints Sensor 1: Circuit Short to Battery Sets when the RCM senses a short to voltage from the driver C-pillar side impact sensor feed or return circuit or from the passenger door side impact sensor feed or return circuit that is greater than the normal sensor operating voltage.
B1418:13 Passenger Side Restraints Sensor 1: Circuit Open Sets when the RCM senses an open from the passenger door side impact sensor feed or return circuit, or a short to voltage from the sensor feed or return circuit that is within a predetermined range from the normal sensor operating voltage.
B1418:96 Passenger Side Restraints Sensor 1: Component Internal Failure Sets when the RCM senses a short to ground from the driver C-pillar side impact sensor feed circuit, a short to ground from the passenger door side impact sensor feed circuit, a short to voltage from the driver C-pillar side impact sensor feed circuit that is less than the normal sensor operating voltage, or a short to voltage from the passenger door side impact sensor feed circuit that is less than the normal sensor operating voltage.