LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1161 (RCM Guided Routine Testing -- (3 Of 4)) >> Pinpoint Tests >> Pinpoint Test BE: CAN Bus Failure >> Normal Operation and Fault Conditions

Normal Operation and Fault Conditions

WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.

The RCM communicates with other modules on the HS-CAN. When the ignition is first turned ON, the RCM will attempt to initialize itself on the HS-CAN. 

If the RCM cannot initialize on the HS-CAN, or if it cannot communicate with any other module, the RCM stores DTC U0001:88 or U1A14:55 in memory and sends a message to the IPC to illuminate the airbag warning indicator.

PPT BE RCM DTC FAULT TRIGGER CONDITIONS

DTC Description Fault Trigger Conditions