LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1160 (RCM Guided Routine Testing -- (2 Of 4)) >> Pinpoint Tests >> Pinpoint Test ASB: Passenger Airbag Disable (PAD) Indicator (OFF indicator) (in FCIM) >> Normal Operation and Fault Conditions

Normal Operation and Fault Conditions

WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.

The RCM briefly activates the PAD indicator to prove-out and verify to the occupants correct functional operation of the PAD indicator. 

The RCM monitors the PAD indicator circuits for the following faults: 

If a fault is detected, the RCM stores DTC B00D5:11, B00D5:12 or B00D5:13 in memory and sends a message to the IPC to illuminate the airbag warning indicator.

PPT AS RCM DTC FAULT TRIGGER CONDITIONS

DTC Description Fault Trigger Conditions