LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1160 (RCM Guided Routine Testing -- (2 Of 4)) >> Pinpoint Tests >> Pinpoint Test AM: Central Configuration Fault >> Notes

Pinpoint Test AM: Central Configuration Fault: Notes

WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.

Refer to Supplemental Restraint System in OEM Wiring Diagrams article, for schematic and connector information.

NOTE: DTC U2300:55 is set in every new RCM that has not previously been installed or that has previously been installed but has not yet successfully received configuration data messages from the BCM. DO NOT replace any components for this DTC unless directed to do so by the following pinpoint test.