Third Row Center Seatbelt Retractor - Short Wheelbase: Removal
WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Removal steps in this procedure may contain installation details.
- Disconnect the third row center seatbelt from the third row center seatbelt buckle assembly.
- Press the release button. Use the General Equipment: Flat-Bladed Screwdriver
- Release the third row center seatbelt retractor.
- Position the liftgate opening weatherstrip aside.
- Release the clips and remove the liftgate opening upper trim panel.
- Remove the third row center seatbelt retractor.
- Remove the bolt.
- Release the locking tab.
Torque: 30 lb.ft (40 Nm)