LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1151 (Safety Belt System) >> Removal And Installation >> Second Row Outer Seatbelt Upper Retractor - Vehicles With: Inflatable Seatbelts >> Removal

Second Row Outer Seatbelt Upper Retractor - Vehicles With: Inflatable Seatbelts: Removal

WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
NOTE: LH shown, RH similar.
  1. Remove the loadspace trim panel. Refer to: Loadspace Trim Panel .
  2. Remove the second row outer seatbelt upper retractor.

    1. Remove the D-ring bolt.

      Torque: 30 lb.ft (40 Nm)

    2. Remove the retractor bolt.

      Torque: 30 lb.ft (40 Nm)

GFD275653Courtesy of FORD MOTOR COMPANY