Rear Bumper: Removal

WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Removal steps in this procedure may contain installation details.

Remove the rear bumper cover. Refer to: Rear Bumper Cover .
Disconnect the electrical connector, separate the wiring harness guides and position the wiring harness aside.

Courtesy of FORD MOTOR COMPANY
With the help of an assistant. Remove the bolts and the rear bumper.
Torque: 173 lb.ft (235 Nm)

Courtesy of FORD MOTOR COMPANY