LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1150 (Bumper System) >> Removal And Installation >> Front Bumper Cover >> Installation

Front Bumper Cover: Installation

WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse the removal procedure.

    Vehicles equipped with 360° cameras only 

  2. Using a diagnostic scan tool, following the on screen instructions for the LIN New Module Initialization-IPMB configure the IPMB.
  3. Align the 360° cameras. Refer to: 360 Degree View Camera Alignment .