Exterior Rear Door Handle: Removal
WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
LH side shown, RH side similar.
NOTE:
Removal steps in this procedure may contain installation details.
- Remove the rear door trim panel. Refer to: Rear Door Trim Panel .
- Remove the watershield.
-
NOTE: The rear door is shown transparent for clarity.
Disconnect the exterior rear door handle electrical connector.
- Remove the exterior rear door handle access plug.
- Remove the exterior rear door handle.
- Hold the exterior rear door handle open.
- Turn the release screw enough to release the exterior rear door handle and remove the exterior rear door handle.
Torque: 62 lb.in (7 Nm)