LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1147 (Handles, Locks, Latches And Entry Systems) >> Diagnosis And Testing >> Locks, Latches and Entry Systems >> Pinpoint Tests >> Pinpoint Test Y : The Approach Detection Feature Is Inoperative >> Notes

Pinpoint Test Y : The Approach Detection Feature Is Inoperative: Notes

WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.

The Approach Detection Feature Is Inoperative 

Normal Operations and Fault Conditions 

REFER to: Handles, Locks, Latches and Entry Systems - System Operation and Component Description .

BCM DTC Fault Trigger Conditions 

DTC Description Fault Trigger Conditions
B10C6:01 Exterior Trunk Antenna: General Electrical Failure Set by the BCM when a fault is detected on the approach detection antenna or circuits.

Possible Cause