Rear Door Glass Top Run: Removal
WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
LH side shown, RH side similar.
NOTE:
Removal steps in this procedure may contain installation details.
- Remove the rear door window glass. Refer to: Rear Door Window Glass .
- Remove the adhesive tape cover.
- Remove the bolt from the rear door glass top run.
Torque
: 71 lb.in (8 Nm)
- Remove the screw from the rear door glass top run.
Torque
: 8 lb.in (0.9 Nm)
- Remove the rear door glass top run.
- Remove the rear door glass top run the door frame channel.
- Remove the rear door glass top run the door frame channel.
- Remove the rear door glass top run the door frame channel.
- Remove the rear door glass top run.