Third Row Single Seat Cushion Cover: Removal

WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.

Remove the third row single seat. Refer to: Third Row Seat .
Detach the third row single seat cushion cover J-clips.

Courtesy of FORD MOTOR COMPANY
Remove the third row single seat cushion cover and foam as an assembly.

Courtesy of FORD MOTOR COMPANY
NOTE: Use care when separating the cushion cover from the hook-and-loop strips or the hook-and-loop strips may be torn from the cushion foam.

NOTE: Use care when separating the cushion cover from the hook-and-arrows, or the hooks can be torn from the cushion foam.

NOTE: This step is only necessary when installing a new component.

Remove the third row single seat cushion cover.
1. Invert the cushion cover.
2. Release the hook-and-loop strips.
3. Release the hook-and-arrows.

Courtesy of FORD MOTOR COMPANY