LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1143 (Seating System - Second Row) >> Removal And Installation >> Second Row Seat Head Restraint Guide Sleeve >> Installation

Second Row Seat Head Restraint Guide Sleeve: Installation

WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: Always install new head restraint guide sleeves. Difficult adjustment of the head restraint may occur. Failure to follow these instructions may result in component failure.
    NOTE: Front seat head restraint guide sleeves are not interchangeable. Failure to install the correct head restraint guide sleeves at the correct position may result in component failure.

    Allow the head restraint guide sleeve to slide freely through the backrest foam pad and backrest trim cover. Using hang pressure, twist the head restraint guide sleeve while pushing it into the backrest frame until the tab is locked into place.

    GFD275222Courtesy of FORD MOTOR COMPANY
  2. Depress the tabs and install the head restraint.
GFD275223Courtesy of FORD MOTOR COMPANY