LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1143 (Seating System - Second Row) >> Description And Operation >> Second Row Seats - System Operation and Component Description >> System Operation >> Power E-Z Entry Seats

Power E-Z Entry Seats

WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.

When the rear passenger door is open, the E-Z entry seats are activated by the associated seat switch (located in each C-pillar trim panel). When the SCMJ receives an input from the seat switch, it supplies voltage to an actuator which releases a latch, allowing the seat base to pitch up/forward. To return to a seating position, the seat must be manually latched to the floor. There are no serviceable components of the power E-Z entry system within the seat assembly. The actuator is serviced by installing a new seat frame assembly.

scientia non olet · About LEMON Manuals