LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1142 (Seating System - Front (2 Of 2)) >> Diagnosis And Testing >> Front Seats >> Pinpoint Test(s) >> Pinpoint Test Z : DTC: U0208:00 >> Notes

Pinpoint Test Z : DTC: U0208:00: Notes

WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.

Refer to Wiring Diagrams Module Communications Network for schematic and connector information.

Normal Operation and Fault Conditions 

The SCMG and DSM communicate using the MS-CAN. The SCMH and SCMB communicate using the MS-CAN.

DTC Fault Trigger Conditions 

DTC Description Fault Trigger Conditions
U0208:00 Lost Communication With "Seat Control Module A": No Sub Type Information Set by the SCMG/ SCMH whenever it has lost communication to the DSM/ SCMB for 5 seconds or longer while the SCMG/ SCMH input voltage is between 10 and 15.5 volts.

Possible Causes 

scientia non olet · About LEMON Manuals