LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1142 (Seating System - Front (2 Of 2)) >> Diagnosis And Testing >> Front Seats >> Pinpoint Test(s) >> Pinpoint Test Ab : DTC: U0256:00 >> Notes

Pinpoint Test Ab : DTC: U0256:00: Notes

WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.

Refer to Wiring Diagrams Module Communications Network for schematic and connector information.

Normal Operation and Fault Conditions 

The SCMG and SCMH communicate to the FCIM using the CAN.

DTC Fault Trigger Conditions 

DTC Description Fault Trigger Conditions
U0256:00 Lost Communication With Front Controls Interface Module "A": No Sub Type Information Set by the SCMG/ SCMH whenever it has lost communication to the FCIM for 5 seconds or longer while the SCMG/ SCMH input voltage is between 10 and 15.5 volts.

Possible Causes