Running Board Control Module (RBM): Removal
WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Removal steps in this procedure may contain installation details.
- Remove the steering column opening trim panel.
 Courtesy of FORD MOTOR COMPANY
|
- Remove the bolts and the steering column reinforcement panel.
Torque: 80 lb.in (9 Nm)
 Courtesy of FORD MOTOR COMPANY
|
- Disconnect the electrical connectors.
 Courtesy of FORD MOTOR COMPANY
|
- Remove the bolt and the RBM.
Torque: 80 lb.in (9 Nm)
 Courtesy of FORD MOTOR COMPANY
|