Rear Door Moulding: Removal

WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Removal steps in this procedure may contain installation details.

NOTE: SWB (Short wheel base) shown, LWB (Long wheel base) similar.

NOTE: LH side shown, RH side similar.

NOTE: Only use moderate force.

NOTE: Make sure that a new component is installed.

Using a non-marring trim removal tool, disengage the retainer clips, release adhesive tape and remove moulding.

Courtesy of FORD MOTOR COMPANY