LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1132 (Side And Rear Vision System) >> Diagnosis And Testing >> Blind Spot Information System >> Pinpoint Tests >> Pinpoint Test G : DTC (Diagnostic Trouble Code) U0100:00 >> Notes

Pinpoint Test G : DTC (Diagnostic Trouble Code) U0100:00: Notes

WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.

DTC U0100:00 

Refer to Wiring Diagram Module Communications Network for schematic and connector information.

Normal Operation and Fault Conditions 

The SODL and SODR communicate with the PCM through the MS-CAN, GWM and HS-CAN1.

DTC Fault Trigger Conditions 

DTC Description Fault Trigger Conditions
U0100:00 Lost Communication with ECM/PCM "A": No Sub Type Information A continuous memory DTC that sets in the SODL and SODR when messages received from the PCM are missing.

Possible Causes