Pinpoint Test A : No Key Detected Displays In The IPC (Instrument Panel Cluster) Message Center: Notes
WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.
Refer to Passive Anti-Theft System for schematic and connector information.
Refer to Remote Keyless Entry and Alarm for schematic and connector information.
Normal Operation and Fault Conditions
REFER to: Passive Anti-Theft System (PATS) - System Operation and Component Description .
The PATS does not disable an already running vehicle.
BCM DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B10C7:01 | Interior Trunk Antenna: General Electrical Failure | Sets when the BCM detects a fault with the keyless entry rear antenna or associated circuitry. |
| B10C9:01 | Interior Front Antenna: General Electrical Failure | Sets when the BCM detects a fault with the PATS front antenna or associated circuitry. |
Possible Causes
- Environmental interference
- Wiring, terminals or connectors
- Passive key not programmed
- PATS front antenna
- Keyless entry rear antenna
- BCM