LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1123 (Interior Lighting) >> Diagnosis And Testing >> Interior Lighting >> Pinpoint Tests >> Pinpoint Test D : All The Courtesy Lamps Stay On Continuously >> Notes

Pinpoint Test D : All The Courtesy Lamps Stay On Continuously: Notes

WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.

Refer to Wiring Diagram Remote Keyless Entry and Alarm for schematic and connector information.

Normal Operation and Fault Conditions 

REFER to: Interior Lighting - System Operation and Component Description .

BCM DTC Fault Trigger Conditions 

DTC Description Fault Trigger Conditions
B1175:01 Driver Door Ajar Switch: General Electrical Failure An on-demand DTC that sets when the BCM detects a fault on the LH front door ajar circuit.
B1176:01 Passenger Door Ajar Switch: General Electrical Failure An on-demand DTC that sets when the BCM detects a fault on the RH front door ajar circuit.
B11C0:01 Driver Side Rear Door Ajar Switch: General Electrical Failure An on-demand DTC that sets when the BCM detects a fault on the LH rear door ajar circuit.
B11C1:01 Passenger Side Rear Door Ajar Switch: General Electrical Failure An on-demand DTC that sets when the BCM detects a fault on the RH rear door ajar circuit.
B1306:01 Liftgate Ajar Switch: General Electrical Failure An on-demand DTC that sets when the BCM detects a fault on the liftgate ajar circuit.

RGTM DTC Fault Trigger Conditions 

DTC Description Fault Trigger Conditions
B1334:29 Tailgate Glass Release Switch: Signal Invalid An on-demand DTC that sets when the RGTM detects a fault on the liftgate ajar circuit.

Possible Sources