LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1122 (Exterior Lighting (2 Of 2)) >> Removal And Installation >> Rear Lamp Fade Control Module >> Removal

Rear Lamp Fade Control Module: Removal

WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the LH load space trim panel. Refer to: Loadspace Trim Panel .
  2. Pull outward and remove the rear lamp fade control module.

    • Disconnect the electrical connector.

GFD274628Courtesy of FORD MOTOR COMPANY