LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1122 (Exterior Lighting (2 Of 2)) >> Removal And Installation >> Rear Lamp Fade Control Module >> Installation

Rear Lamp Fade Control Module: Installation

WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse the removal procedure.
  2. Using a diagnostic scan tool, complete the BCM - LIN New Module Initialization for the adaptive front lighting module following the on-screen instructions.
scientia non olet · About LEMON Manuals