LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1115 (Charging System (Battery, Battery Mounting And Battery Cables)) >> Removal And Installation >> Battery >> Installation

Removal And Installation: Battery: Installation

WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse the removal procedure.
  2. If installing a new battery, use the scan tool to carry out the Battery Monitoring System (BMS) reset after the battery is connected.