360 Degree View Camera

WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.

The 360 degree view camera system provides several different camera views to visually aid the driver while maneuvering the vehicle at low speed. The camera system is enabled by selecting reverse gear or pressing the camera selection switch when any gear except reverse is selected. The camera views are changed using the camera on-screen button and the available camera views are dependent upon the transmission gear selection. The camera system has features that provide fixed and active guideline overlays on the rear normal view video image to assist the driver in aligning the vehicle and a visual alert function that provides a visual highlight on the rear normal and 360 degree view images in the zone where an object is detected by the audible parking aid system. Using the images from the front, rear, LH, and RH parking aid cameras, the IPMB generates the 360 degree camera views that are displayed on the FDIM.

The front, rear, LH, and RH cameras communicate with the IPMB through a coaxial cable via LVDS.