LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1108 (Information Center - Instrumentation, Message Center And Warning Chimes (2 Of 2)) >> Diagnosis And Testing >> Instrumentation, Message Center and Warning Chimes >> Pinpoint Tests >> Pinpoint Test X : The SELECTABLE Drive Mode Display Is Inoperative >> Notes

Pinpoint Test X : The SELECTABLE Drive Mode Display Is Inoperative: Notes

WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.

Normal Operation and Fault Conditions 

See Selectable Drive/Off Road Modes Display. Refer to: Message Center - System Operation and Component Description .

If the selectable drive mode request, selectable drive mode status, selectable drive mode message display or 4x4 high/low status messages are missing for less than 5 seconds, the IPC defaults the selectable drive mode display to the last display based on the last data received.

If the selectable drive mode request, selectable drive mode status, selectable drive mode message display or 4x4 high/low status messages are missing for 5 seconds or longer, the IPC displays a warning message indicating the system fault status defaults the display blank.

Possible Sources 

scientia non olet · About LEMON Manuals