Fuel Tank Filler Pipe: Removal
WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Removal steps in this procedure may contain installation steps.
- With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking and Lifting .
- Disconnect the battery ground cable. Refer to: Battery Disconnect and Connect .
- Drain the fuel tank. Refer to: Fuel Tank Draining .
- Release the clamp and position the fuel tank filler hose aside.
Torque: 44 lb.in (5 Nm)
- Disconnect the fuel tank filler pipe vapor tube. Refer to: Quick Release Coupling
.
- Torque: 133 lb.in (15 Nm)
- Remove the bolt and the fuel tank filler pipe.
Torque: 133 lb.in (15 Nm)