LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1101 (Fuel Tank And Fuel Lines - 3.5L ECOBOOST (272KW/370PS)) >> Removal And Installation >> Fuel Pump and Sender Unit >> Installation

Fuel Pump and Sender Unit: Installation

WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: Make sure to install a new Fuel Pump and Sender Unit O-ring seal.
    NOTE: Make sure the alignment tabs on the Fuel Pump and Sender Unit and the fuel tank meet prior to tightening the Fuel Pump and Sender Unit lock ring.

    To install, reverse the removal procedure.