LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1097 (Four-Wheel Drive Systems) >> Diagnosis And Testing >> Four-Wheel Drive Systems - Vehicles With: 2-Speed Torque On Demand Transfer Case >> Symptom Charts >> Symptom Chart: Four-Wheel Drive Systems - 2 Speed Torque on Demand

Symptom Chart: Four-Wheel Drive Systems - 2 Speed Torque on Demand

WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.

Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods .

Four-Wheel Drive Systems

Symptom Possible Sources Action
Unable to duplicate customer concern. 4WD system and/or related components GO to Pinpoint Test A 
No communication with the TCCM Scan tool
DLC
TCCM
Wiring, terminals or connectors
REFER to: Communications Network - System Operation and Component Description .
Perform Pinpoint test for no TCCM communication.
No communication with the 4x4 Switch Module Scan tool
BJB fuse power supply circuit
BJB fuse Ground circuit
HS-CAN
DLC
TCCM
Wiring, terminals or connectors
Charging system
Perform Pinpoint test for no TCCM communication.
REFER to: Communications Network - System Operation and Component Description .
The front axle does not engage/disengage correctly IWE
IWE solenoid
Vacuum leaks
GO to Pinpoint Test E 
The shift motor does not operate correctly Wiring, terminals or connectors
Transfer case
TCCM
Shift motor
GO to Pinpoint Test G 
Unable to achieve flat tow (neutral tow) mode Wiring, terminals or connectors
HS-CAN
IPC
TCCM
Door ajar switch
Ignition switch
REFER to: Neutral Flat Tow Activation and Deactivation .