LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1094 (Automatic Transmission - 10R80 (2 Of 2)) >> Removal And Installation >> Intermediate Speed Sensor B (ISSB) >> Removal

Intermediate Speed Sensor B (ISSB): Removal

WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the main control valve body. Refer to: Main Control Valve Body (307-01B). Refer to: Main Control Valve Body .
  2. Remove the intermediate speed sensor B.

    1. Slide the plastic lock to the unlocked position. While pressing the plastic tab, disconnect the electrical connector.
    2. Remove the bolt and the intermediate speed sensor B.

GFD273481Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals