LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1092 (Electronic Engine Controls - 3.5L ECOBOOST (272KW/370PS)) >> Removal And Installation >> Intake Air Temperature (IAT) Sensor >> Removal

Intake Air Temperature (IAT) Sensor: Removal

WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
  1. Disconnect the IAT sensor electrical connector.
    GFD273338Courtesy of FORD MOTOR COMPANY
  2. Remove the IAT sensor.
GFD273339Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals