LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1088 (Accessory Drive Belt System - 3.5L ECOBOOST (272KW/370PS)) >> Removal And Installation >> Accessory Drive Belt Tensioner >> Removal

Accessory Drive Belt Tensioner: Removal

WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
  1. Remove the accessory drive belt. Refer to: Accessory Drive Belt .
  2. Remove the bolts and the accessory drive belt tensioner.

    Torque: 18 lb.ft (25 Nm)

GFD273240Courtesy of FORD MOTOR COMPANY