Block Heater: Removal
WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Removal steps in this procedure may contain installation details.
- Drain the cooling system. Refer to:Cooling System Draining, Vacuum Filling and Bleeding .
- Remove the LHCAC intake pipe. Refer to: Charge Air Cooler (CAC) Intake Pipe .
- Disconnect the block heater electrical connector.
- Remove the block heater.
Torque: 41 lb.ft (55 Nm)