LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1076 (Hydraulic Brake System Actuation) >> Diagnosis And Testing >> Hydraulic Brake Actuation >> Symptom Chart - Adjustable Pedals With Memory Feature

Symptom Chart - Adjustable Pedals With Memory Feature

WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.

Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods .

Symptom Possible Sources Action
A module does not respond to the diagnostic scan tool Fuse
Wiring, terminals or connectors
BCMB concern
REFER to: MODULE COMMUNICATIONS NETWORK (2 OF 2) .
Adjustable pedals are inoperative or do not operate correctly - using the adjustable pedal control switch Refer to the Pinpoint Test GO to Pinpoint Test A 
Adjustable pedals are inoperative or do not operate correctly - using the memory SET switch buttons Refer to the Pinpoint Test GO to Pinpoint Test B 
Adjustable pedals are inoperative or do not operate correctly - using the RKE transmitter Refer to the Pinpoint Test GO to Pinpoint Test B 
Adjustable pedals only move for 2 seconds regardless of how long the adjustable pedal control switch is pressed Diagnostic Trouble Codes (DTCs) present in the BCMB RETRIEVE and DIAGNOSE all BCMB Diagnostic Trouble Codes (DTCs)