LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1069 (Front Drive Axle/Differential) >> Removal And Installation >> Axle Tube Bearing >> Installation

Axle Tube Bearing: Installation

WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using the special tool, install the new axle shaft bearing. Use Special Service Tool: 205-123 (T78P-1177-A) Installer, Axle Shaft Oil Seal.
    GFD271852Courtesy of FORD MOTOR COMPANY
  2. Install the axle shaft seal. Refer to: Axle Shaft Seal .