Differential Housing Cover: Removal
WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the rear axle assembly. Refer to: Axle Assembly .
-
NOTE: Differential with eLSD shown, non eLSD is similar.
Remove the bolts and the differential housing cover.
-
NOTE: Remove all of the silicone gasket and make sure the surfaces are free of oil before applying the new silicone gasket.
Clean the gasket mating surface of the axle and the differential housing cover. Refer to: RTV Sealing Surface Cleaning and Preparation .