LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1050 (Sunroof System (Service Information)) >> 60 Sunroof >> Sliding Sunroof >> Neutral Position For Slotted Guide Rail, Checking And Adjusting >> Sedan Neutral Position >> Adjusting

Sedan Neutral Position: Adjusting

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Sliding/Tilting Sunroof Motor Removed.

-- Remove the sunroof panel from the sliding/tilting sunroof.

-- Push the slotted guide rail on both sides by hand into the zero position.

-- Adjust and install the motor in the zero position.