Refrigerant, Filling In Reservoir

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Connect the bottle with fresh refrigerant R1234yf to the service coupling on the low pressure side on the A/C service station. Refer to the A/C service station Owner's Manual.

-- Perform a gas analysis for the refrigerant to be filled (from the bottle) using the A/C service station. Refer to REFRIGERANT GAS ANALYSIS, PERFORMING .

Perform the procedure as described in the A/C service station Owner's Manual. Refer to A/C service station Owner's Manual.

CAUTION:

Risk of explosion due to overfilling the refrigerant vessels.

Refrigerant can expand and the refrigerant vessel can explode due to overfilling.

- Use a refrigerant vessel with safety valve.

- Never exceed the permitted capacity of the refrigerant vessel.

NOTE:

Depending on the version of the A/C service station and the procedures to be performed a specific minimum amount of refrigerant, refrigerant oil and UV-leak detection are in the corresponding reservoir of the A/C service station. Refer to the A/C service station Owner's Manual.