Tools And Materials, Obtainable From Distribution Center Or Importer
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Tools and materials can be obtained. Refer to the Parts Information.
| Overview |
|---|
| A/C service station with flushing device-- With program installed for flushing the refrigerant circuit using refrigerant R1234yf, and corresponding flushing equipment.-- With the analyzer installed to determine the contamination of refrigerant R1234yf. |
| Refrigerant R1234yf. Refer to the Parts Information. |
| Extractor (for refrigerant R1234yf)- dry ice box. Refer to the Parts Information. |
| VW/Audi - passenger vehicle adapter set. Refer to the Parts Information.-- To connect the A/C service station on the refrigerant circuit to flush and to bridge removed components when flushing.-- To connect specific components to a pressure hose to blow through with compressed air or nitrogen. |
| R1234yf/R134a leak detector. Refer to Parts Information. |
| Combined fine filter unit for compressed-air system (oil, dirt and water separator as used for painting facilities). Refer to the Parts Information. |
| Seals (different versions, pay attention to the allocation). Refer to the Parts Information. |
| Refrigerant oil (different versions, pay attention to the allocation). Refer to the Parts Information. |
Leak detection system with the following contents. Refer to the Parts Information.
|
| Tracer refill cartridge. Refer to the Parts Information. |
| Release tools for refrigerant line with quick-release coupling. Refer to the Parts Information. |
| Removal tool for the refrigerant lines quick-release coupling. Refer to the Parts Information. |
| Socket for removing and installing the valves. Refer to the Parts Information. |